This DIY product is designed for a three years old boy that was born with cerebral palsy. He has an inadequate trunk control so he can not sit independently, he would fall on his side.

At home he sits in a custom tailor made seatshell. But this is too big to take everywhere along. His parents like to go out by bike to friends or family, but there is always the problem that they can’t let hem sit on a normal chair to play with other children.

The question of the parents was to make a chair which is foldable, easy to carry, giving enough support so that the boy can sit straight and play with his friends, but still compact to put in the bicycle bag.

A shot movie, following on the intractable, will explain the advantages of the seat.

Step 1: Materials needed

Step 2: Saw the wooden pieces

Buy two different pieces of wood, a 3mm multiplex and a 15mm multiplex. Than saw two 395x300x4mm pieces and two 330x400x15mm pieces.
Drill holes in the 15 mm pieces; drill in a line 35mm of the border. The distance between two holes is 3 mm.Buy two different pieces of wood, a 3mm multiplex and a 15mm multiplex. Than saw two 395x300x4mm pieces and two 330x400x15mm pieces.

Drill holes in the 15 mm pieces; drill in a line 35mm of the border. The distance between two holes is 3 mm.

There have to be cut out rectangulars as well, this can also be done with a drill, by drilling holes close to each other.

Step 3: Attach a lath

First there has to be sawed a lath 330x20X15, we attached this to one of the wooden pieces of 15 thickness, with an air staple gun but this can also be done manually.

Step 4: Connecting the wooden pieces

Weave the rope between the thickest wooden pieces by using the saddle stitch. This technique will ensure the proper firmness.

Step 5: Attach Foam

Attach the foam using an air staple gun or an manual stapler.

Step 6: Skai

Attach the leather, by using an air staple gun or manually with a stapler.

Step 7: Handles

Stich handles and attach them onto the back of the wooden pieces.

Step 8: The back

Attach the thinner wooden pieces with some nails onto the backs of the seat, to hide the ugly staples.

Step 9: Add the straps

First make a finishing stitch around the openings for the buckles.

We used a support pants, because the child can not sit straight by himself. That little pants ensures support around the waist and helps him to sit up straight.

To attach the support pants, insert the buckles in the openings and secure them at the back with the clamping buckles.

Step 10: Make a fitting table

The table ensures extra stability for the child. The child can put his arms on the table and lean on it, this will make him sit up more straight by himself. He has to do some effort by himself with is better than a belt around his chest, because exercise is good for the child, otherwise he will get lazy which is bad for his muscles.

The table is made in the same style as the seat.

We used the multiplex. Dimensions:

– table leaf: 390x310x5mm
cutout for the belly: 260x150mm

– table legs: 310x210x5mm

To make the cutout for the belly, measure the waist of the child and see for yourself what the best measurement is for your child.

To put the table together, we used the same technique as the seat so we drill holes in the planks 20 mm of the borders. The holes are drilled 30mm from each other. For the plank, also drilling 20mm from the border and 30mm from each other.

For stability, we attached 4 laths again on the side planks, on each side plank, two laths. This laths are 18x15x310mm.

The planks are fixed to each other with rope again, we will do this in the same way as we did with the seat.

The loop that can be seen on the pictures has been stitched out of the skai and attached with staples onto the middle plank. This loop can be attached onto the support pants. This ensures that the table can’t be pushed away by the child while he is playing. This gives extra safety.

Step 11: Final result and team

You can find more information on our blog

Project made by:Carolle Geldof, Emily Quartier, Jaana Caes and Sahin Vanneste

Via Instructables

Be sure to click the ‘This Solution Helped Me’ button at the top of this page if you give this a try!

For a budget friendly way to create built up handles for cutlery, pens and toothbrushes, you can use a pack of foam hair rollers!

This video uses foam tubing purchased specifically for making built up handles.

Remember to click the ‘This Solution Helped Me’ button at the top of the page if you found this hack useful!

Materials:

• Ballpoint pen
• Clothes peg

Tools:

• Junior hacksaw
• Hot glue gun
• Sandpaper
• Craft knife

Method:

• Remove the nib and ink reservoir from the ballpoint pen
• Mark and saw a section approx 3cm long
• Sand the edges and use a blade to clean the inside edges
• Using hot glue, fix the pen section to the peg and leave a moment to set
• Enjoy your new straw holder!

Please remember to click the ‘This Solution Helped Me’ button at the top of this page and leave a comment to let us know how you got on with this hack.

Via Thingiverse

A chunky deadbolt style knob for your door key – give this a print!

Download the design files

Our sponsor charity DEMAND Design & Manufacture for Disability will be happy to help if you don’t have access to a 3D printer, just get in touch via their website.

Remember to click the ‘This Solution Helped Me’ button at the top of this page, or leave a comment letting us know how you got on with this solution!

Via Thingiverse

Via My Mini Factory

A key holder for anyone who has trouble gripping small objects – why not give this simple two piece solution a try.

Download the design files

Our sponsor charity DEMAND Design & Manufacture for Disability will be happy to help if you don’t have access to a 3D printer, just get in touch via their website.

Remember to click the ‘This Solution Helped Me’ button at the top of this page, or leave a comment letting us know how you got on with this solution!

Via My Mini Factory

Via My Mini Factory

Tired of struggling with plugs? Print this design and give it a try!

Download the design files

Our sponsor charity DEMAND Design & Manufacture for Disability will be happy to help if you don’t have access to a 3D printer, just get in touch via their website.

Remember to click the ‘This Solution Helped Me’ button at the top of this page, or leave a comment letting us know how you got on with this solution!

Via My Mini Factory

Via Thingiverse

Open sliding doors with ease using this additional clip on handle.

Download the design files

Our sponsor charity DEMAND Design & Manufacture for Disability will be happy to help if you don’t have access to a 3D printer, just get in touch via their website.

Remember to click the ‘This Solution Helped Me’ button at the top of this page, or leave a comment letting us know how you got on with this solution!

Via Thingiverse

Via Thingiverse

For to make it easier to turn the doorknob, this 3D printed handle could be the fix you’re looking for! This design fits doorknob diameters 47 and 51mm.

Download the design files

Our sponsor charity DEMAND Design & Manufacture for Disability will be happy to help if you don’t have access to a 3D printer, just get in touch via their website.

Remember to click the ‘This Solution Helped Me’ button at the top of this page, or leave a comment letting us know how you got on with this solution!

Via Thingiverse

Via Thingiverse

Excellent for anyone with weakened grip or arthritis, why not give this fix a try?

Download the design files

Our sponsor charity DEMAND Design & Manufacture for Disability will be happy to help if you don’t have access to a 3D printer, just get in touch via their website.

Remember to click the ‘This Solution Helped Me’ button at the top of this page, or leave a comment letting us know how you got on with this solution!

Via Thingiverse